1.Connect the vehicle to backup BDC code by OBD

2.Remove the BDC2 module from the vehicle and use the VP100 adapter to perform pre-processing (see the wiring diagram and wiring tutorial below)

3.After the pre-processing is completed, install the BDC2 back to the vehicle to generate the dealer key

4.Place the generated dealer key close to the key induction coil (usually on the right side of the steering column) and press and hold the start button for 20 seconds.After the matching is successful, check whether the key is working properly

1.Connect the vehicle to backup BDC code by OBD

2.Remove the BDC2 module from the vehicle and use the VP100 adapter to perform pre-processing (see the wiring diagram and wiring tutorial below)

3.After the pre-processing is completed, install the BDC2 back to the vehicle to generate the dealer key

4.Place the generated dealer key close to the key induction coil (usually on the right side of the steering column) and press and hold the start button for 20 seconds.After the matching is successful, check whether the key is working properly